Mopar Muscle Homepage
Get Adobe Flash player

Mopar Muscle Community

Join our Mopar Muscle online Community to interact with other automotive enthusiasts in our blogs and forums, ask questions, help other members, and much more.

Coming Distractions: A High Impact Resto

'70 'Cuda, found at Carlisle
31414359 Posted Today 07:00 AM by scott_ross

Do you have a pile of parts in your garage or shop that you KNOW will be a Mopar to be proud of, once you get it finished---or get started on it? We've got a story of a '70 'Cuda that went that route (HINT: You're looking...

Read full blog
Filed under: Miscellaneous  |  Comments (0)


Coming Distractions: So Fugly, It's Fast!

"New Lean Breed of Dodge," First Max Wedge out of Hamtramck
31414095 Posted Yesterday 12:56 PM by scott_ross

  It's the Dodge so ugly that a dozen dealers quit on dealer-introduction day back in '61...but this one's the first in a long line of mega-motored B-Body Mopar screamers on the strip. Find out more...only in...

Read full blog
Filed under: Miscellaneous  |  Comments (0)

Where's Quality Control?

Brand New Jeep Leaking
25987472 Posted November 17 2009 06:05 AM by KevinDiOssi

A troubling site when perusing the mall...

Read full blog
Filed under: Miscellaneous, KEVIN DIOSSI  |  Comments (0)

Brothers Performance East NOW OPEN!

Brothers Performance Officially Opens Their Doors
25904432 Posted November 12 2009 06:27 AM by KevinDiOssi

 Brothers Performance East ~Now Open~ DeLand Florida Location - 800.486.2681 Monday - Friday 8am - 5pm EST Sat - 9am - 4pm EST.  

Read full blog
Filed under: Mopar News, KEVIN DIOSSI  |  Comments (0)

Jeep Patriot Research
Jeep Patriot No matter what new car you are searching for we have all the information you need. Take a look at the new Jeep Patriot and browse reviews on the transmission, engine, as well as other features. Fuel efficiency is important and the 2010 Patriot has fuel economy comparable to other cars in its class, and can seat 5 people comfortably. Other similar vehicles are the Dodge Journey and the Dodge Viper.

Mopar muscle Forums

 
'01 Dodge 2500 V10 4x4 w 5.5" Lift & 35" Super Swampers & 4.10 Gears
Additions: JET Chip, K&N Intake, Gibson Headers, Magnaflow Exhaust. The problem that I'm having is... more
 
67 Plymouth Fury Ignition Question
Did this model come with an electronic ignition system from the factory or does it use points? ... more
 
Estimated HP?
I just bought a 408 stroker motor and was wondering if any one might have an estimate on how much... more
 
74 duster
Hey i have a 74 duster it had a 225 /6 but i put a hole in the side of the block the size of a... more
 
Need top steering column bearing '70 E body
Need a bearing or part # also is the insulator (rubber coating surrounding the bearing) available??... more
 
P/U 727 Car 727 differences?
Is there a difference between a 727 2 wheel drive pick-up transmission and a 727 out of a car?... more
 
Need top steering column bearing '70 E body
Need a bearing or part # also is the insulator (rubber coating surrounding the bearing) available??... more
 
timing sets
Can anyone tell me if a gear drive timing set is worth the money difference from a double roller, &... more
 
differences between a 273 crank and a 318 crank
what are the differences between a 273 crank and a 318 crank out of a 1988 d100. I know the 273 is... more
 
Boring 318 for more power?
Hi all, I've got a 318 at the machine shop and need some advice. I've been following the 400hp... more
 
Starter Relay by-pass
Recently I was rear ended. Shortly after the seat belt relay buzzer goes off and I can only start... more
 
Lorrie Van Haul - 1967 Dodge P200 Mail Van
Hey All, My name is JC Allison, 70 years old, and the caretaker of [bold]Lorrie Van Haul[/bold], a... more
 
BELVEDERE VERSUS BELVEDERE II
CAN ANYONE TELL ME THE DIFFERENCE BETWEEN A 66 BELVEDERE AND A BELVEDERE II... more
 
What heads to use on a 383?

I'm starting a mild buildup on my 1966 Chrysler Newport. Not exactly conventional but why... more

 
I think I will part with my Baby
I have been thinking long and hard and I had quite a few sleepless nights. I think I've made the... more