If you were to poll any sized group of people about Mopar's LX platform cars, you could just about guarantee a 50/50 split of love it/hate it. Some complain that the cars are too heavy or have too many doors, and yet others simply love them. Well, one weekend in June, the NMCA decided to get as many of these late model, Hemi cars together as they could, and let them go at it. When the guys at www.lxforums.com found out about the shootout, it was easy to find enough people to make the LX Shootout an event in itself.

There were cars that showed up that get driven every day and came to have fun, and others that get driven every day and run some unbelievable quarter-mile times.

Since there were so many LX platform cars to choose from when we got to the event, we had to narrow it down to just a few. We chose a diverse group of cars that represent a myriad of capabilities these cars possess, and if you see one of these "so-called" heavy-metal monsters pull up beside you at a red light, you may want to think twice about a challenge.

Rick Ellison
Fayetteville, NC
'02 Black Challenger
Time: 12.89/110

Rick, who spends his daytime working with Uncle Sam, brought his 6.1-powered, automatic shifted Challenger out to play. Even though the car had less than 1,000 miles on it, he made sure to run it as best-and hard-as he could. The list of modifications on Rick's car, starts with Arrington CNC ported heads, and a camshaft with lifts of .586/.593 and duration numbers at .050 of .225/.228. To further help it breathe, a 90mm throttle body, ported intake, and Kook's headers were added. Although his qualifying rounds looked promising, a foul start in the first round kept him from continuing on.

Dan Vanhorn
Wantagh, NY
'06 Charger
Time: 10.60/125

Driving to the event to race, Dan really impressed a lot of people with his Charger. Being one of the more modified vehicles, he entered in the Head's Up class. To get his car to run the number, Dan relies on parts like a stroked 6.1, displacing 426 inches, Getting to that displacement is done with K1 4.080-inch crankshaft and 6.125-inch rods with Wiseco pistons mounted to them, altogether, the compression ratio comes in at around 11.0:1. The camshaft is a proprietary grind by Power Ported Performance, so no specs are available. The heads were CNC ported by PPP, and feature 2.10 and 1.60-inch valves. Finishing the engine is a 90 mm throttle body, Kooks headers, and a shot of nitrous. If you're going to make power, you need heavy-duty parts, and that's really evident at the rear. Dan uses Axles made by the Driveshaft Shop that are rated to withstand 1,000 horsepower.

Dave Coults
Nashua, NH
'06 Magnum SRT8
Time: 12.44/112.66

Dave's Maggie may have over 93,000 miles on it, but it's far from being tired. The Hemi was opened up to 372 inches by virtue of an overbore during a rebuild. While he was rebuilding, he added a Frank Racing camshaft with .556/.547-inches of lift, and .218/.212 degrees of duration at .050 inch. He also had the heads ported by Franks Racing. Other than the Kook's headers, that's about all there is to this impressive ride's engine. The transmission is stock, but features a Pro Torque 2,800 converter. Dave's combination helped him get through three rounds of competition before having to bow out after the Semi final round.