On the sides (sail panels), there is a flap that should be pulled aroundthe framework. | 
You should be able to pull the side-panel flap around the framework andhave no large wrinkles, but if you do have them, remove the tackstrip--with the top--from the body. Move the material slightly lower onthe tack strip to remove the wrinkles. Small wrinkles can be removedwith the careful use of a hair dryer or heat gun. Don't get the materialtoo tight, or the top will not go up when finished. | 
When you have the rear of the top properly attached, join the frameworkto the windshield, pull the top material taut, and mark the edge of theheader with a pencil. This mark will be crucial in the next step. |