Mopar Muscle Homepage

Disc Brake Upgrade

With the rotor on the spindle, pack the other bearing the same as the first one and place it over the spindle and into the rotor. Now put the washer and nut on the spindle and torque to 17-25 ft-lbs while spinning the rotor. Back off the nut after this (which set the bearing into place) and re-torque the nut to 10-15 ft-lbs. Now lock the nut in place with the new cotter pin supplied. Don't forget the new dust cover.
C-Body Disc-Brake Conversion

 With the rotor on the spindle, pack the other bearing the same as the first one and place it over the spindle and into the rotor. Now put the washer and nut on the spindle and torque to 17-25 ft-lbs while spinning the rotor. Back off the nut after this (which set the bearing into place) and re-torque the nut to 10-15 ft-lbs. Now lock the nut in place with the new cotter pin supplied. Don't forget the new dust cover.  View Related Article

 

Get Adobe Flash player