EFI Made Easy
Bring your classic Mopar V-8 into the 21st Century when you add Holley’s new “Terminator” electronic fuel injection (EFI) system to it. Its throttle body delivers fuel through an annular discharge ring, for excellent fuel atomization and no restriction to air flow. The air-entry area is functioned after the Holley throttle body that powers every NASCAR Sprint Cup Series team, and the Terminator’s ECU delivers fast and accurate self-tuning while you drive. Installation is DIY-easy. You don’t need a separate computer—all you need to do is, once you’ve got the throttle body and ECU installed and connected, answer a few basic questions on the included hand-held tuner, and then start driving. The 950-cfm square-flange Terminator throttle body comes with 80 lb-hr fuel Injectors, which can handle engines from 250 to 600 hp, and they’re available in a tumble-polished aluminum finish, or in Holley’s popular hard coat anodized Hard Core Gray.
Get it: Holley • www.holley.com
A-Body A-Pillar Apparel
Restoring a second-gen Barracuda, or a late ’60s/early ’70s Dart hardtop? Is the interior trim past its prime, if it’s even there at all? Relax. Tony’s Parts now has new reproduction A-pillar trim for your ’67-’69 Plymouth Barracuda (all body styles), or your ’67-’72 Dart 270, Dart GT/GTS, Swinger, or Swinger 340 hardtop. Like the originals, they’re injection-molded with the correct surface finish, and they install easily like the OEM A-pillar trim pieces did. These are just the thing to replace the A-pillar trim in your ride that’s, at best, cracked and broken (thanks to the plastic-decomposition process known as outgassing)—or, at worst, gone altogether. And they won’t crack when you’re installing them, like a brittle swap meet find will. They’re in stock now, ready to ship, and they’re another must-have reproduction from Tony’s Parts!
Get It: Tony’s Parts • 302/398-0821 •
Take Pride In Your Ride
Show your Mopar pride when you add American Car Craft’s new stainless steel Mopar Trunk Panel Emblem to your ’08-later Dodge Challenger’s trunklid or hood. Officially licensed by Mopar, its available in your choice of polished or brushed stainless steel, each with the blue “Omega M” logo. Measuring about 121⁄2 inches by 121⁄2 inches, it’s designed to fit on American Car Craft’s ’08-’13 Challenger stainless trunk and hood panels, giving your ride’s trunk or engine bay an instant show-quality dress-up. Installation? It’s peel-and-stick easy! Made in the U.S.A., it’s available now from American Car Craft.
Get it: American Car Craft • 727/861-1500 •