HemiJeep Hardware

Want to get more out of your 2012-2014 Jeep Grand Cherokee SRT8? How about replacing its OEM exhaust system with Stainless Works' new long-tube headers and catback exhaust system. Designed to maximize the power of the Grand Cherokee's 6.4 liter Hemi, the headers have a 17⁄8-inch primary tubes and 3-inch collectors, while the cat-back exhausts have a 3-inch diameter, dual resonators and X-pipe, and come with your choice of either chambered or S-Tube Turbo mufflers. (High-flow cats or off-road pipes are also available.) The headers and exhausts are all made of USA-sourced 304L stainless steel, are fully mandrel-bent and TIG-welded, come with all hardware needed for installation, and include a lifetime guarantee on materials and workmanship. Got an 2006-2011 SRT8? Stainless Works has an exhaust system for you, too!

Get it: Stainless Works

Ring Your 'Cuda

New from Herb's Parts: Taillight trim rings for your 1972-1974 Plymouth Barracuda or 'Cuda. These OEM-quality taillight trim rings are manufactured on OEM-style precise tooling from 304-grade stainless steel, and come polished and ready to install with no modification needed. They'll fit on reproduction 1972-1974 Barracuda/'Cuda taillights, as well as on originals, and they're sold in sets of four, with or without lenses. They're often overlooked during repair and restoration. Plus, until now, repops haven't been available, which meant re-using your beat-up originals—if you still had them.

Get it: Herb's Parts

Stop Better, Look Better

Your Mopar's performance and looks can be improved immensely by going with high-performance disc brakes at each corner—especially ones with Wilwood's Dynapro billet aluminum calipers. They combine race-bred brake technology with superior strength, a sleek profile, and extreme durability in adverse conditions—like what you'll find on race day. Whether it's a Dynapro, Narrow-Mount Dynapro, or Dynapro Single caliper, you'll get full surface detail machining, heavy-wall stainless pistons, internal fluid passages, four corner bleeds, replaceable SRS bridge plates, and Wilwood's Quick-E-Clip pad retainers. Plus, when you log on to Wilwood's website (www.wilwood.com), you'll not only find the Dynapro caliper that fits your specific application, you'll find it in a set that's ready to bolt on your ride, with Wilwood's tech assistance available if you need it.

Get it: Wilwood

Cool That Gearbox

It might be winter now, but summer's coming up sooner than you think. Are the transmissions in your daily driver, tow rig, show/race car, etc., ready for it? Install Derale's Series 7000 TransCoolers, and those gearboxes will be more than up to it! They prevent heat-related failures, extend your transmission's life, and improve performance, thanks to their embossed turbulators, which maximize heat transfer. The four-pass model seen here also uses ½-inch copper tubing with aluminum fins and 11⁄32-inch inlets. Derale's Series 7000 TransCoolers also include radiator hose, a radiator adaptor, and two mounting options, plus the hardware and instructions you'll need for a get-it-done-this-weekend installation.

Get It: Derale Performance

Keep Your Early B-Body Drop-top Dry

With the OEM rubber windshield header seal on your early B-Body droptop approaching its Golden Anniversary, Metro Moulded Parts' Gold Series windshield header seal is just what your vintage convertible needs. (Especially now that springtime cruising time is fast approaching!) It'll allow the front of the convertible top on your 1962-'65 B-Body to fit snugly and latch more easily. And, thanks to Metro's modern-tech materials, they're soft enough for a good seal and easy top closure, yet durable enough to last a long time while cutting wind noise and leakage—and will look terrific while doing it!

Get It: Metro Moulded Parts

Bib Your Ride!

Don't you just hate it when you discover a scratch in the paint on your just-repainted Mopar...and you know it came from your belt buckle? Keep that from happening again when you get an Auto Fender Bib. It's just the thing to cushion and protect that paint job 360 degrees around the engine compartment. It's more than just another fender cover—its 100-percent soft fabric prevents scratching while checking a fluid level, or performing regular maintenance or parts replacement. The Auto Fender Bib fits any A-Body or larger Plymouth, Dodge, De Soto, Chrysler or Imperial from 1950-onward with a standard (rear-opening) hood, as well as those same-vintage/rear-opening-hood-equipped Dodge, Fargo, and RAM trucks. Prices start at just $99.95.

Get it: Auto Fender Bib