If you're restoring your B- or E-Body, and you've hit a road block in regards to your gauges, check this out. Dante's Mopar Parts now has reproduction gauges for '68-1970 B-Bodies, and 1970 and 1971 Challengers and Barracudas. These reproduction gauges are manufactured to factory specifications, and features the correct white numbers and markings to provide an authentic replacement. It's also an officially-licensed Mopar Restoration Product, and fits Rally dash only.
Get It: Dante's Mopar Parts
PerTronix says that their new plug and play cast distributors for 273-360 Mopar engines provide maximum ignition performance and easy installation all at a price you can afford. The distributor lets you to upgrade your outdated points or stock electronic distributor with a performance proven distributor that features the patented Ignitor or Ignitor III® electronic ignition module. Not only that, but it gives an OE look as well. These distributors are perfect for the restoration guys who want a stock looking distributor without having to use worn out parts. The distributor is also compatible with any inductive ignition coil, but high rpm performance can be improved when used with Pertronix's low resistance Flame-Thrower coils. These units feature all new (not rebuilt) parts. The gears are hardened steel for exact tolerances, and the vacuum canister is adjustable for optimum performance. These distributors are legal in all 50 states and Canada (CARB EO # 5D-57-23).
Get It: PerTronix
The DFX series clutch discs by Centerforce are the next level in single disc high-performance clutches. The best news is that it is now available for 1970-1972 Dodge and Plymouth big block engines. The DFX clutch design has been developed to meet the needs of modern high performance vehicles, and this paddle/button style disc has been through constant testing to create the best unit available. Today's technology has raised engine torque to unprecedented levels, and still allow the cars we enjoy to be daily drivers. Drivers need a clutch that can offer; positive engagement, quiet operation, light pedal effort, and high-end holding capacity. DFX offers that and more!
Get It: Centerforce
Air flow to an engine e is crucial to make power. Airaid now offers two all-new cold air Intakes for Hemis. The MXP system starts with a roto-molded air box that is designed to keep engine heat away from the filter, while increasing the amount of cold air available. The large air filter provides the engine with a steady supply of clean, cold air, and the filter is available with either oiled red composite material or SynthaMax® dry filtration technology in red, blue, or black. The new kits include all necessary hardware, and use factory mounting points for an easy installation. The MXP-Series' system is made in the USA, and backed by the company's "No Hassle" warranty.
Get It: Airaid
Sloppy Steer Correctors
If you're tired of your Mopar wandering all over the road when you drive, Performance Online has the fix for your front. They now carry complete front end rebuild kits for 1963-1972 A, B and E-Body Mopars. The kits are available with either rubber or urethane bushings. Not only will these kits update your old worn out tie rods, ball joints and bump stops, POL tells us that installing the kit will also increase your car's performance! The complete kit includes: upper and lower ball joints, inner and outer tie-rod ends, new adjusting sleeves, idler arm (or idler arm bushings), upper and lower control arm bushings, and strut rod bushings. It also comes with a limited lifetime warranty.
Get It: Performance Online
If you're into making you 2008 and newer Challenger look great, check out these strut brace covers and hardware kit from Drake Muscle Cars. These machined stainless steel nuts and strut covers are a must-have. They're machined from solid 6061-T6 billet aluminum, and these covers are a great addition to your engine compartment. The covers are designed to match the other billet engine pieces that are also available from Drake Muscle Cars, like the billet strut tower-brace.
Get It: Drake Muscle Cars
You need fenders for you're a-Body, and Auto Metal Direct has 1970-74 Plymouth Duster, 1971-74 Plymouth Scamp Front Fenders. How's that for service? These all-new steel fenders have been developed using original OEM fenders. They have been put through rigorous test-fitting sessions, and the new heavy-gauge steel fenders are ready for you to install. AMD tells us that these new fenders look terrific, and fit correctly.
Get It: Auto Metal Direct
A Bright Idea
If you're looking for parts for your Dodge truck, Herb's Parts has added a truck parts line, and have been adding to that inventory steadily. Take for instance, these side marker lights for 1970 and 1971 Dodge pickups. The lenses are made from precision tooling for an exact look, and they tell us that they fit just like originals. The application includes such truck models as Adventurer, Dude, Camper Special, and Power Wagon. They fit 1970-1978 Dodge van as well.
Get It: Herb's Parts
A Binding Option
Performance Online, Inc. (POL) has introduced this newly designed stock-fitment disc brakes that are available for '62-1974 cars. We're told that these kits mount to your stock spindles. Just to let you know, this conversion requires using 15-inch wheels. The kit includes 11-inch rotors with a 5x4-1/2-inch bolt pattern, calipers and brake pads, bearings, seals, dust caps, and everything else needed. It also comes with a limited lifetime warranty. Note: A-Body vehicles will require some modifications, and depending on application, additional items may be required to complete installation.
Get It: Performance Online, Inc. (POL)