Logging It In
BG Fuel Systems has released a new line of billet-aluminum fuel logs for 4150- and 4500-series flanged carburetors with center-hung floats. These fuel logs come in three configurations: a poppet-style bypass (170020); a diaphragm bypass (170031); and a nonbypass, two-outlet version (170021). The fuel logs are adjustable and interchange with Demon, King Demon, Holley, and Holley Dominator carbs. They have triple O-ring seals to minimize leaks and are designed to accept a back-mounted fuel-pressure gauge. BG Fuel Systems, 706/864-8544; barrygrant.com
Name That Tuning Kit
BG Fuel Systems offers several carb-maintenance kits for Demon and Holley carburetors. Each kit is suitable for two- and four-barrel gas and alcohol Holleys and Demons. The BG Track Pack kit contains all the necessary components (gaskets, seals, diaphragms, mixture screws, needle, seat assemblies, and so on) to field-service a carb on the road or at the track. The BG Carburetor Rebuild is set up for a major carb overhaul, and the BG Master Rebuild kit allows for a complete carb renewal. Each kit is blister-packaged to prevent damage to the parts. BG Fuel Systems, 706/864-8544; barrygrant.com
Pro Active
ProChargers are now available for your Mopars. The Supercharger store has introduced a new line of kits to install ProCharger centrifugal superchargers on small- and big-block Mopars in A-, B-, and E-Bodies. These kits are true bolt-ons and are engineered to retain the stock water pump and stock alternator location and fit under stock hoods. This supercharger installation has increased horsepower as much as 40 percent with an intercooler and 70 percent without. It's available in satin or polished finishes. The Supercharger Store, 520/456-9706
Bring Back the Pack
These two outboard carbs looked the same before the folks at ProMax Carbs got ahold of them. ProMax offers complete Six Pack restoration service. If you don't want the full resto--just a rebuild or plating only--they can do that, also. ProMax does all of its plating in house. Each rebuilt carb is placed on a Six Pack motor and test-driven to ensure reliability. ProMax Carbs, 866/776-2629; promaxcarbs.com
Got it Covered
This T-6061 CNC-machined billet aluminum timing cover fits B, RB, and Hemi engines. It has a removable cam gear cover to allow cam timing adjustments. The front seal holder is removable. The seal is installed from the front of the holder to allow easy seal changes without removing the entire cover. Quarter-inch-thick rails insure good gasket sealing. They are available in blue, black, and polished finishes. Other colors are available on request at additional cost. The cover is machined by Special Metal Products for Magnum HP Inc. Magnum HP, 239/513-0750; magnumhp.com