Fuel Feeder
Barry Grant introduces the PoweRodder carburetor with a fresh, new design and features for a two-piece carburetor. The PoweRodder offers the street-enthusiast market a straightforward carburetor, designed to deliver smooth performance and easy installation with minimal tuning. This is a great carburetor for cars and trucks equipped with mild-performance engines with stock or near-stock idle characteristics. They are available in 525, 625, and 725 cfm. Each two-piece designed carb has no gaskets below the fuel line, and no power valves or metering rods. It fits most aftermarket intake manifolds, and the unique float chamber provides exceptional fuel distribution to main and secondary jets during cornering, acceleration, and braking. A single primary jet delivers a balanced fuel delivery for great off-idle throttle response, and an adjustable stroke accelerator pump for quick, easy tuning with no tools required. Barry Grant, (706) 864-8544; www.barrygrant.com
Tranny Trouble Enders
A complete line of transmission rebuild kits is now available for older cars from Kanter Auto Products. Each kit is specifically engineered for each make and model, with many improved and redesigned parts. The deluxe kit provides everything needed for your automatic transmission rebuild, including bands and bushings. For further information on Automatic Transmission Rebuild Kits or other products available, call or write and mention code L101 to receive your free copy of our catalog. Kanter Auto Products, (800) 526-1096; www.kanter.com
X-Games
Flowtech Performance Exhaust now offers a Universal X-pipe kit for 2.5- and 3-inch exhaust systems. The Universal X-pipe was designed to fill the void where certain applications don't have an X-pipe kit offered. The Universal X-pipe kit comes with adjustable cut-to-fit legs, so it can be easily fitted to many applications. Each X-pipe kit is constructed with 16-gauge, mandrel-bent aluminized tubing for added durability. Included in each kit is a universal siamese X-pipe section, four cut-to-fit legs, collectors, and clamps. Flowtech (a division of Holley), (270) 781-9741; For nearest dealer, (800) HOLLEY-1;www.flowtechheaders.com
Mixture Monitor
The ECM G100 Air/Fuel Ratio Gauge, from Powertrain Electronics, LLC, takes the guesswork out of performance tuning. Designed for in-vehicle installation, the G100 is a useful in-car air/fuel ratio monitor. A wide-range, five-wire AFR sensor, mounted in the exhaust, is capable of accurate feedback over the full rpm range. The G100 does not use a production O2 or a lean burn sensor. The system records up to a full minute of air/fuel ratio data. The pod is supplied with a five-foot cable to be mounted for easy driver access. The playback information can be monitored on the gauge or connected to a data logger. The system is easily calibrated, allowing for altitude adjustments or sensor aging. Powertrain Electronics, LLC, (805) 466-5252; www.powertrain.net
A Better Butt
The wait is over for all of you die-hard Mopar drag racers looking for the strongest bolt-in rearend possible. The new Moser 60 rearend can be made a direct bolt-in replacement for many popular leaf-spring applications. Made from Moser Engineering specifications, the housing center of this cast unit features forged caps and is much stronger in many vital areas than the OEM original. The housing includes mounting points for the new and improved Moser pinion snubber. The snubber, based on the '60s original, not only helps control wheelhop at the launch, but with the addition of the Moser Engineering Adjustable Snubber, you can fine-tune the rotation of the housing by 1-inch increments. The beefed-up center is accompanied by new 3-inch O.D. tubing, your choice of new forged housing ends, and new Moser designed mounts. Packages available. Moser Engineering, (260) 726-6689; moserengineering.com