|
|
 After you have reattached...  After you have reattached the tensioner wire, there is a flap that attaches to the side of the top framework. This is only on the front couple inches of the top, near the header.  Reinstall the seal retain...  Reinstall the seal retainers.  Don't forget to reinstall...  Don't forget to reinstall the well liner.  The welting can now be installed...  The welting can now be installed along the top, above the rear window. Attach the welting with staples, fold it over itself, and cap it at the ends.  With our new top installed,...  With our new top installed, it was a lot nicer riding home in the rain.  Finally, the top is folded...  Finally, the top is folded down, and the header-seal retainer is reinstalled on the car. First, install the new seal between the roof and the seal retainer, and fasten the retainer to the header.  The new top seals from Steele...  The new top seals from Steele Rubber Products are exact replacements. As bad as our old seals looked, it was a good idea to change them. Replace the seals in the reverse order you removed them, and voila-a new cover over your cockpit.
|