What You'll Need
Lots of small parts are required to complete this conversion. the following is a list of the part numbers you'll need to make your Magnum look like an SRT. Thanks to Tom Edwards Dodge, we were able to secure all the part numbers. You'll need to call your local Dodge dealer for current parts pricing.
| Quantity | Part number | Description |
| 1 | 4854675-AA | Front fascia |
| 1 | 5030048-AA | Fog lamp bezel |
| 1 | 5030049-AA | Fog lamp bezel |
| 4 | 6504521 | Pushpins |
| 1 | 030054-AA | Air duct |
| 1 | 030055-AA | Air duct |
| 1 | 5030042-AB | Grille |
| 1 | 5030043-AA | Grille |
| 1 | 5030044-AA | Front molding |
| 1 | 5030045-AA | Front molding |
| 2 | 6503819 | Retainer |
| 8 | 4806226-AA | Spring clip |
| 4 | 6505223-AA | Nut |
| 2 | 6503929 | Cone screw |
| 4 | 4806110-AA | Pin |
| 8 | 505145-AA | Hex screw |
| 1 | 5029908-AB | Front shield |
| 11 | 34201631 | Retainer |
| 1 | 065322-AC | Weatherstrip |
| 1 | 5030050-AB | Rear fascia |
| 1 | 5030052-AA | Fascia molding |
| 1 | 5030053-AA | Fascia molding |
| 1 | 5030051-AA | Closeout panel |
| 4 | 6504521 | Pushpin |
| 3 | 4806240-AB | Pushpin |
| 4 | 4806334-AA | Fascia pin |
| 4 | 6500859 | Rivet |
| 1 | 4805754-AF | Headlamp |
| 1 | 4805755-AF | Headlamp |
| 1 | 4806011-AE | Windshield washer hose |
| 1 | 5030130-AA | Plate, package |
| 24 | 68019469-AA | Grille clip |
| 1 | 4805899-AB | Ram ornament |
 J.D. paints each part in Diamont...  J.D. paints each part in Diamont base/clear to match the car's exterior color. If you're doing this conversion at home, we recommend taking the parts to a quality paint-and-body shop to be painted. |  After the paint cures, the...  After the paint cures, the grilles, trim, and ducting can be assembled before the bumper is installed on the car. |  Starting at the bottom, the...  Starting at the bottom, the SRT front bumper cover is installed using the new hardware. The same procedure is used for the rear bumper. |
 The hood can now be installed...  The hood can now be installed and adjusted for proper fit. Once the hood is bolted in place, the front hood seal and windshield washer nozzles can be installed. |  From the rear, the SRT bumper...  From the rear, the SRT bumper cover gives the Magnum a more aggressive look. |  The SRT bumpers, trim, and...  The SRT bumpers, trim, and grille, matched with the RKSport Magnum Force hood, really give the Magnum R/T an aggressive look that matches its performance. At under $4,000, this conversion is far less than the difference between an R/T and SRT versions of the Magnum. So if you're happy with the performance of an R/T but want the SRT look, this transformation definitely makes sense. |