Related Photo Galleries
We fabricated this bracket that mounts to the rear-shifter mounting location and goes forward to where the shifter needs to mount. The bracket is made of two pieces of steel: One is 931/44x4x31/48 inches, and the other is 4x311/42x31/44 inches. The 31/44-inch piece is welded to the back of the 31/48-inch piece to space the 31/48-inch piece from the housing. Three mounting holes are then drilled through the two pieces, and the bracket is bolted to the housing. Three holes also need to be drilled and tapped in front of the rear mounting location for the shifter bracket.