Rebuild 833 Tranny 19 Input Rollers
|
When you are installing the tail assembly into the main case, be sure not to knock any of the 16 input rollers out of place. Turning the input shaft helps prevent this. Make sure the brass synchro-ring is indexed properly with the synchro hub before the case is bolted to the tailhousing; otherwise, the shaft will bind. When you finally get the tail assembly into the case, snugly install two tail housing bolts, and make sure all the synchronizers and gears operate smoothly. If everything is fine, install the rest of the bolts and tighten to 50 lb-ft. View Related Article
|
|