0511 Tci Shift 3 Z
|
With the valvebody removed, the front band adjusting screw on the outside of the case can be loosened enough to remove the band apply-linkage. The front-band lever can now be moved so that the front servo cover can be removed. This is done by removing the snap ring. Use a C-clamp to compress the servo slightly to aid in the snap ring removal. This will expose the servo and return springs. If your transmission has two servo return springs, remove the outer spring and reassemble the servo. If only one spring is present, reassemble the servo as it was removed. The band adjusting linkage can now be reinstalled and adjusted by tightening to 72 inch pounds, then backing off two full turns before tightening the lock nut. View Related Article
|
|
|
|