| Cam Specs* |
| Custom Comp Solid | Intake | Exhaust |
| Lobe number | 7131 | 7132 |
| Advertised Duration (@.020") | 272 | 276 |
| Duration @ .050" | 243 | 247 |
| Duration @ .200" | 157 | 161 |
| Lobe Lift | 361" | 366" |
| Theoretical lift @ 1.5:1 rr | 542" | 549" |
| Theoretical lift @ 1.6:1 rr | 578" | 586" |
| Lobe Separation Angle | 108° |
| Installed intake centerline | 106° |
Note: This camshaft is based upon the FL-Series .875-inch tappet lobe profiles. Comps quicker equivalent MM-Series .904-inch lobe profiles offer more velocity andarea under the curve, typically further enhancing performance. Contact Competition Cams for info.
Port Flow Summary
Flow Tested by Steve Dulcich
Westech's Superflow 600 Flowbench (with FlowCom)
All tests at 28" water depressionsion |
| IFT | Intake | Exhaust |
| 050 | 32.1 | 24.2 |
| 100 | 62.5 | 54.5 |
| 200 | 132 | 115 |
| 300 | 188 | 170 |
| 400 | 236 | 197 |
| 500 | 272 | 209 |
| 600 | 300 | 213 |
| 700 | 314 | 215 |
| Peak flow with pipe | 230* |
Dyno Results DTS Dyno Tested at JMS |
| RPM | Torque | HP |
| .000 | 392 | 224 |
| .500 | 390 | 260 |
| .000 | 424 | 323 |
| .500 | 453 | 388 |
| .000 | 463 | 441 |
| .100 | 468 | 453 |
| .500 | 464 | 486 |
| .000 | 453 | 517 |
| .500 | 434 | 537 |
| .000 | 397 | 529 |