Rebuilding Dashpanel Doorjamb
|
With the dash facing up on sawhorses, remove the six Phillips-head screws that hold the face trim. Now remove the four screws securing the heater controls (A). Be careful when removing controls and don't pull too hard and yank the wires out of the switch. (If your dash is still in the car, also unhook the cables going to the heater box). Next, take out the three screws from the maplight and remove it (B), noting that the wire going to the passenger-side doorjamb courtesy light is also on this circuit in this model. It must be removed from the doorjamb. View Related Article
|
|