Mopar Muscle Homepage

Replacing The Dutchman Panel Removing

With a cut-off wheel and a reciprocating air saw, the old tray is cut out approximately 1/4-inch inboard from the factory seams, leaving the outer edges of the tray attached to the car at both quarter-panel sides.
Replacing The Dutchman Panel - A Runner Repair

With a cut-off wheel and a reciprocating air saw, the old tray is cut out approximately 1/4-inch inboard from the factory seams, leaving the outer edges of the tray attached to the car at both quarter-panel sides.  View Related Article

 

Get Adobe Flash player