Mopar Muscle Homepage

155 0306 Arm 11 Z

<b>11.</b> Here's the new trick product we were talking about. Theselaser-cut steel reinforcement plates from AR Engineering are made to boxthe control arm for added strength. The boxed arms have less deflection,especially if heavy-duty sway bars are used. If the control-arm membershave spread, allowing for a loose torsion-bar anchor, this is a goodtime to remove some of the clearance as the structure is reinforced.Notice that the weld area has been buffed to shiny metal. It'spractically impossible to get a good weld on an as-blasted surface.
Tips and Tricks for Rebuilding Lower Control Arms

 11. Here's the new trick product we were talking about. Theselaser-cut steel reinforcement plates from AR Engineering are made to boxthe control arm for added strength. The boxed arms have less deflection,especially if heavy-duty sway bars are used. If the control-arm membershave spread, allowing for a loose torsion-bar anchor, this is a goodtime to remove some of the clearance as the structure is reinforced.Notice that the weld area has been buffed to shiny metal. It'spractically impossible to get a good weld on an as-blasted surface.  View Related Article

 

Get Adobe Flash player