Mopar Muscle Homepage

155 0306 Arm 12 Z

<b>12.</b> The 1/8-inch plates easily conform to the curvature of thecontrol arm with clamping. Now is also a good time to see if thetorsion-bar- adjuster pivot at the end of the arm has too muchside-to-side clearance. Pulling in the sides of the control arm for aflush fit while clamping the plate can reduce the clearance. The anchordoes not move relative to the control arm once the ride height is set,so little to no clearance is required. The fit of our plates is right onthe money.
Tips and Tricks for Rebuilding Lower Control Arms

 12. The 1/8-inch plates easily conform to the curvature of thecontrol arm with clamping. Now is also a good time to see if thetorsion-bar- adjuster pivot at the end of the arm has too muchside-to-side clearance. Pulling in the sides of the control arm for aflush fit while clamping the plate can reduce the clearance. The anchordoes not move relative to the control arm once the ride height is set,so little to no clearance is required. The fit of our plates is right onthe money.  View Related Article

 

Get Adobe Flash player